Contact Us

Shanghai Allmarine Industry Co.,Ltd.
 
16-58 Chenbao Road, Malu Industry Park, Jiading Dist., Shanghai City,China.
 
Tel +86 21-59152099
Fax +86 21-59152055
 
         allmarine@126.com
 
 
 

How to avoid the quick coupling damaged?

10/15/2012 8:01:48 PM
Camlock coupling can be divided into: shared air with quick connectors, oxygen-fuel gas quick connector, gas liquid quick connectors, hydraulic quick connector, inert gas with quick connectors, cooling water temperature of oil with quick connector, semiconductors quick connector.
Stainless steel quick coupling should not be used for purposes other than the joints, like mixed with metal powder or sand and dust, and other places that may have resulted not work or leak occurs. Should also note the use of such stainless steel fittings, can not exceed the maximum pressure limit, the fluid used to clean fluid is filtered through a filter, which does not contain other impurities. Work, the temperature control should be within the scope of the use of stainless steel quick connector to prevent the sealing material wear or leakage. Must not be artificially hitting, bending, stretching joints to prevent damage caused connector.
When the quick connector used for some time, it is prone to failure, like shedding, leaks and other problems have occurred. The use of stainless steel quick connectors should be checked for leaks, if there should stop using it immediately and replaced with a new, while recognizing gas welding torch valve is turned off and then connect. The hose should be firmly inserted into the interface at the bottom, with a fixed the hose belt or nut. Avoid cracked hose, to prevent causing leakage and shedding. Use in the event of vibration, shock, should immediately stop work if the mandatory machine durability of the job will reduce.