Centrifugal wilden pump characteristics

Centrifugal wilden pump is composed of two parts by the motor and pump motor for Y-type three-phase asynchronous motor pump and motor using couplings to connect, is equipped with a sealing ring, balancing sleeve wear spare parts available to replace the rotor by the shaft, impeller,the balanced rotor hub, the lower end of the upper part of the water-lubricated bearings angular contact ball bearings DL vertical multistage centrifugal axial force, most of the balance drum to bear the remaining small portion of the residual axial force amplitude angular contact ball bearingsto bear, influent and effluent Sections segment, and the combination of surface paper pad by then tight to achieve sealing seal with packing or mechanical seal.
Centrifugal wilden pump rotation direction of rotation is counterclockwise looking down from the driver side
1，DL vertical multistage pump structure compact volume small beautiful appearance, small footprint to save on construction costs;
2，DL vertical multistage pump suction inlet and outlet on the same center line to simplify the connection of the pipeline;
3, according to the actual situation in the import and export of DL vertical multistage pump can be assembled into a 90 °, 180 °, 270 ° different directions;
4, the pneumatic diaphragm pump according to the actual situation centrifugal pneumatic diaphragm outlet may be fitted into a 1 to 5 outlet guide to the different head to meet the same pump.

Previous: Frequency conversion and explosion-proof ventilation fans
Next: Third generation of wilden pump