High pressure airless paint sprayer notes

1, the working process required to high-pressure airless sprayer placed on a smooth, solid. In the working process, the operator must pay attention to their personal safety, if necessary, with protective covers and caps operate.
2, the operations to be well-ventilated. The motor power cord shall not be stacked items or high-pressure pipe tread, pressure. The high- pressure pipe being dragged in the job should be free from obstruction on the way to avoid damage to high-pressure pipe.
3, power to carefully check to make sure the high-pressure airless spray machine fastener tightening securely, check that all pipe joints are connected firmly.
4, in order to improve the life of this high-pressure airless paint sprayer, paint used should be clean and free of impurities, deterioration, and to go through a 80 mesh filter filtering.
5, the pressure adjustment shall not be greater than 200 bar; such as the replacement of high pressure pipe, the selected pipe must be equipped by the manufacturer.
6, at any time are not allowed to spray gun at others, the job should take strict precautions against the splash of paint on the operator itself, especially damage to the eyes.
7, Don't allowed to use high-pressure airless sprayer to spray acid, corrosive substances, toxic chemicals (such as pesticides, insecticides, etc.). Spray operations shall not be bananas, water, xylene and other solvents.
8, spraying operation is completed, first unloading flow, pressure relief, and then shut the motor, cleaning fluid cleaning paint flows through the various parts and then immediately wash the residue, cleaning with water is strictly prohibited.
9, the mobile airless sprayer, usually to cut off power supply, motor and plug does not allow water, paint contact to keep the machine clean and dry.

Previous: Airless paint spray security technology
Next: the style of the camlock coupling connection